FREE SHIPPING ON ALL ORDERS

Product Help - HD 180 Camera

The ADC-V622 is Alarm.com's flagship camera. This wide-angle camera, designed for high-end residential video monitoring, sets itself apart through forward-looking features and a clean modern design. Covering a full 180° view, users can monitor large areas without having to purchase multiple cameras. With a simple button push on top of the camera, a user can initiate a video and Two-Way Audio call with the Alarm.com app.
  • Audio
  • Power over Ethernet
  • IR night vision
  • 180° FOV
  • Digital pan/tilt/zoom
  • Tap to call out
  • Bluetooth music streaming
Minimum Bandwidth Requirements
  • Without Two-Way Audio: 0.5 Mbps
  • With Two-Way Audio: 1 Mbps
PoE Standard IEEE 802.3af

Status LED Guide

LED Pattern

Status

Descritpion

Green | Solid

 Connected To The Internet Local Network and internet connection with Alarm.com IP

Green | Flashing

 Local Network Connection Local network connection with local IP address, no internet.

Red | Solid

 No Network Connection No Local or Internet connection.

Red | Flashing

 Camera Powering On or Updating Firmware Camera is powering on, or a firmware update is in progress.

Blue | Flashing

 WPS Mode WPS mode is active. To enter WPS mode, press and the menu button and use the volume buttons to scroll to WPS Mode

White | Flashing

 AP Mode Wi-Fi Access Point (AP) Mode is Active. To enter AP mode, Press the Menu Button and Use the Volume Buttons to Scroll to Access Point Mode

Yellow | Flashing

 Bluetooth Pairing Bluetooth pairing mode is active. To pair with Bluetooth, press the Menu button and use the Volume buttons to scroll to Bluetooth mode.

Red & Green | Flashing

 Factory Reset The camera is restoring to factory default settings. Caution: If the camera is already installed, it may need to be removed from the Alarm.com account and re-added after a factory reset. To perform a factory reset, press the Menu button and use the Volume buttons to scroll to the Factory Reset option. Follow the audio prompts to initiate a factory reset.

Refer to the Alarm.com Knowledge Base for more information.